Google Home Not Seeing Chromecast What to Do

Table of Content

• With the Chromecast Voice Remote
• Connect the Mobile and Chromecast to the Same Wi-Fi Network
• Your Chrome browser isn’t up to date
• Set Up the Chromecast Again
• Restart and Update the Chromecast

At this point, the factory reset process has begun. So, try disconnecting some devices, restart your router, and turn off and turn on your Chromecast. Also, it goes without saying that, preferably, both your phone and Chromecast are connected to the same network. Also, consider leaving the Beta program in Home Settings. And, finally, if you use Google Home on an iPhone, disable the Private Wi-Fi option for your Network and enable Location and Bluetooth. The best way to start the troubleshooting is restarting both devices.

Switching your phone to airplane mode is pretty simple and the option for it can be usually found in the quick settings area . Once you have switched your phone to airplane mode, you will have to manually turn on WiFi. This will, as a result, disable airplane mode and you will be back online. After that, open up the Google Home app and proceed with the normal setup to see if the issue persists. This could be caused due to your network settings on your phone at times, however, that’s not highly likely. With that said, we can finally get onto the different methods that you can try in order to have the issue resolved for yourself.

With the Chromecast Voice Remote

The LED light on the side or back of the device will be white. At the top right, tap SettingsMoreFactory resetFactory reset. Perhaps something is off about the original device you weren’t having any luck casting with. If you’re using your smartphone, try using your laptop or tablet.

Check it for system updates and install them if available. A majority of Chromecast devices require you to tap a Cast button within each Chromecast-compatible app. Cast controls are essential to the Chromecast experience, but sometimes the Cast feature can disappear from your mobile device.

Connect the Mobile and Chromecast to the Same Wi-Fi Network

The good news is you’ll fix the problem if you try all the steps mentioned below. You can visit this site to find out more about the tiny LED light here. If none of the instructions mentioned on the page linked is solving the problem, read the steps below. Check if Chromecast is on or not. You can do this by looking at the small flashing light at the midsection of the device.

And finally, take a look at the WiFi network of the device that you are trying to cast from and make sure it matches your Google Home and your Chromecast. One-by-one, confirm the WiFi network of your devices. More likely than not your Google Home will be powered on since it talks to you and it’s obvious.

Your Chrome browser isn’t up to date

But like all modern tech, your Chromecast isn’t bulletproof. Google Chromecast issues can happen. Once in a while, you may notice connectivity issues, glitches with your phone, and other small problems that prevent you from using your Chromecast successfully.

You can fix this by opening your router settings and finding Wireless, then Channel and SSID. If so, change it to another option. If it’s still not visible to your smartphone, keep changing the channel until you find one that doesn’t have as much interference. If it still isn’t working, try setting up Chromecast on another device that has the Google Home app – on a family member’s smartphone, for instance. If it’s working on someone else’s phone, maybe your smartphone needs an update.

Set Up the Chromecast Again

Then, plug another end of the Chromecast device to the HDMI port of your TV. Firstly, connect the Chromecast device to the TV. Check the Wi-Fi network you are currently connected. Since we have already listed the fixes in sequential order, you would want to try the fix one after another and check if your issue is resolved. There could be various other reasons behind this issue so we have compiled a list of several fixes for multiple kinds of scenarios. Without further ado, let’s quickly dive into the article.

The last step on the list is for iPhone and iPad users only. If this didn’t solve your problem, follow the next step. Now that you’re familiar with the purpose of Chromecast, let’s talk about its functions. In the upper right of your TV screen, select your profile Settings . If so, it is very likely that they are throwing off a signal at the same frequency as your Chromecast and interfering with it.

Check Connections and Settings

One of the best ways to get ahead of this issue is to simply connect your Chromecast using the USB power brick that your device came with. This ensures a solid connection for your device at all times and also prevents your Chromecast from rebooting every time you power down your TV. You may have noticed your Chromecast video looking tiled and spotty. Perhaps you’ve encountered one of several buffering screens when trying to stream your favorite show. Whatever the prevailing symptom, the cause can usually be traced to some kind of network issue.

Turning IGMP snooping off resolved the issue. Once you expand the app, tap Uninstall and restart your device. Maybe there was a mistake while you set up the Chromecast and it wasn’t configured properly. You can set up the Chromecast perfectly if you follow the steps below.

My TV isn't detected as a Google Chromecast built-in device or the connection fails during casting

Table of Content

• Perform a factory reset
• Check for Interference Between the Router and Chromecast
• Reasons for Not Finding Chromecast on Your Devices
• From the Chromecast device
• Connect the Mobile and Chromecast to the Same Wi-Fi Network

Press that button to restart the router. Once it is back up again, connect to your WiFi and see if the issue is still there. Chromecast devices are a great way to stream your favorite content from your smartphone to your TV. They’re relatively inexpensive and easy to use. When you plug your Chromecast device into your TV, your phone becomes a remote control and you can use it to stream different apps or videos on the big screen. It’s quite handy, and the only thing you need is a strong and stable Wi-Fi connection.

But I turned it off on every single network card, wired, wireless, virtual. The casts immediately returned to operation for my HassOS VM. I’m having the same problems as OP. I use the Ubiquiti EdgeRouter X and an Unifi AC-AP pro. All devices are on the LAN network, no VLANs configured. I’ve VLans but currenty not for Home Assistant or one of my Chromecast / Google devices.

Perform a factory reset

Then, you can move on to the more complicated fix like resetting the device. Before moving on to the major fixes, make sure the Chromecast device is turned on. You can leave it turned on the whole time as it consumes significantly low amount of power. There isn’t a single reason to pinpoint which explains why exactly you are unable to find Chromecast.

Your device, your smartphone and your Google Home, are all connected to the same network. If you’re casting content from the Chrome browser on your computer, you may have noticed that certain Chromecast controls are missing from your preferred sites. This may be because there’s a new version of Chrome that you need to update to. Sign in by following instructions and check if the Chromecast appears in the bottom section among other devices. The next thing to try is reinstalling the Google Home app. Chances are that the app itself is the problem, considering we tackled basically everything else in the previous steps.

Check for Interference Between the Router and Chromecast

After that, you can plug it back in and go through the setup process to see if that bore any fruit. Another option is to reset your Chromecast gadget to its factory settings. You don’t have to worry about losing your data – the only thing you’ll need to do is to set up the device again. Resetting Chromecast to the factory settings is simple – press the button on the back of the gadget and hold for around 20 seconds. Finally, if none of the previous steps worked, the only thing we can recommend is resetting your Chromecast to factory settings. Since, in this case, you can’t use the Google Home app to reset Chromecast, you can try with the on-device physical reset option.

I can add them via the configuration.yaml, but then I don’t see my groups what I have created. Sign in again with the same account, open Google Home, and see if the Chromecast appears. Finally, follow the instructions on your TV screen. Choose an email account that you want to link to the Chromecast device. This method will work for Chromecast 2nd generation, 3rd generation, and Ultra.

Reasons for Not Finding Chromecast on Your Devices

Connect the mobile device and your TV to the same network.If you use a dual-band wireless router, ensure your devices are connected to the same frequency. Another thing you can do is to update the router’s firmware – if there’s an update available. If this isn’t the cause for you not being able to connect your Chromecast device to your Google Home app, at least you’ll be safe while online. First, try restarting your phone, or your modem and router by disconnecting them for a few seconds and then turning them back on.

Make sure the WiFi and Google Home are visible and in range. If any of these two devices are out of range, put your Chromecast near them and make sure they’re connected. Still, if this doesn’t work, then don’t give up hope yet, because we’ve got more options to try.

From the Chromecast device

Therefore, you could be experiencing the Chromecast issue due to a poor network connection. If connecting both the devices to the same network doesn’t solve your problem, you can move on to this method. We recommend you wait for at least 30 seconds to make sure that the device is turned off completely. After plugging in the Chromecast to the power source, it will reboot and update automatically. Since there is no physical button for on/off on the device itself, you can unplug its charger from the power source to turn it off. Furthermore, make sure that your Chromecast device is in closer proximity to the router and reposition them if necessary.

Connect your phone to the name of your Chromecast on Wi-Fi then set it up on the google home app. Press and hold the reset button until the Chromecast LED emits orange light. This method will restore the Chromecast device to its default settings.

Step 4. Complete the setup steps for your device

If you are using android then turn on wifi, bluetooth and location and open the google home app. Be within 10 meters from your chromecast and that should be all. If switching your phone to airplane mode does not fix the issue for you, there are chances that the issue is being caused by your network connection. Unfortunately, simply toggling the WiFi connection on your phone won’t do the trick here.

Check it for system updates and install them if available. A majority of Chromecast devices require you to tap a Cast button within each Chromecast-compatible app. Cast controls are essential to the Chromecast experience, but sometimes the Cast feature can disappear from your mobile device.